Sculpted Prim of solid of revolution texture Maker

Yuzuru, I noticed it appears that Rokuro does not output texture coordinates to the OBJ file. It could be very useful to output the texture coordinates as well, would that be too difficult?

ROKURO Pro will support texture coordinates by the next major upgrade.
The test of cooperation with other tools requires time.
And, I think that import of the OBJ file of Blender is not perfect.
Therefore, ROKURO Pro will carry out support of import of the OBJ file of Blender by the next major upgrade.

Yuzuru, I love Rokuro and use Rokuro Pro frequently, wonderful tool ^_^

However, recently I've found an issue that has caused a little problem with uploading the sculpted map losslessly. Rokuro currently outputs to a 512x512 .tga image, which is fine for textures, but for sculpted prims it's a bit much. When you try to losslessly upload a 512x512 image, it doesn't retain enough quality to work for a perfect sculpt. 64x64 is the best size to output to for a sculpt map to be losslessly uploaded for a perfect prim, so I think that maybe there should be a capability to change to outputting a 64x64 .tga file.

Once again, wonderful tool ^_^

Okiphia Rayna
Thank you for the information on the Lossless option of a second life viewer.
ROKURO Pro 1.37 can output the TGA file of 64x64.
Please select a menu of File - Setup. And Please set TGA Save Size to 64x64.

The following points were corrected.
-"View Level" Menu is changed to "Level of Detail".
-"Initializing" Menu of File is changed to "New".
-"Initializing" Menu of Texture is changed to "Reset".
-"Flip" function is added.
-"Select All" function is added.
-The frequency in use of CPU was decreased.
-The problem of the output of the OBJ file which occurred in the decimal point in the area using "," was corrected.

ROKURO Pro 1.33-1.37 users can use their own password.
Please visit my web page http://kanae.net/secondlife/

thankies ^_^

Thank you for donating to ROKURO.

I updated ROKURO to 1.03.
Hello. I update ROKURO to 1.03.
I am sorry to have kept you waiting for a long time.

The following points were updated.
-The output algorithm of sculpted prim is changed.
Thereby, you get a more exact sculpted prim.
(This updation is related to a new tool, TATARA.)
And I will update ROKURO's Readme further in the near future.
Also I will update NOMI and ROKURO Pro.

Please visit my web page http://kanae.net/secondlife/

Hello. I update ROKURO Pro to 1.39.
This is update of ROKURO Pro which I promised at "Life 2.0 Spring".
I am sorry to have kept you waiting for a long time.

The following points were updated.
-The load sculpted prim option of BMP and JPEG and PNG is added.
-Function of copy protection by transparent was added.
-The output algorithm of sculpted prim is changed.
-The fault of Horizontal Align of a Mage tab is corrected.
-The fault of Vertical Align of a Mage tab is corrected.
-The fault of a display of Symmetry of the View menu is corrected.

ROKURO Pro 1.33-1.38 users can use their password.

And I will update ROKURO Pro's Readme further in the near future.

Please visit my web page http://kanae.net/secondlife/

Hello. I releaase new tool "TATARA".
TATARA is the software about which I spoke at "Life 2.0 Spring".

TATARA mainly has the following functions.

- It has almost all the functions of ROKURO Pro.
- It has a preview function more exact than ROKURO Pro.
- It can be edited for every section of an object.
- It can make 4 kinds of PRIM_TYPE.
- It can output an OBJ file with a texture.
- It can exchange OBJ file to Blender.
- It has a simple function which draws a texture.
- It has the function to shorten edit time, such as a flip.

Please visit my web page http://kanae.net/secondlife/

Yuzuru, just wanted to note that the URL for the image son that page is broken and contain a %5C where they shouldn't.

Looking at the program now

Thank you for talking about my web page mistakes. I'm sorry..

I updated my Web page. http://kanae.net/tatara.html

Now you can see my web page's image.

Yuzuru,
You have outdone yourself with Tatara. Congratulations!

Questions before I purchase: will you give buyers free updates? Are you planning on making the texture drawing function more sophisticated (smudge and colorpicker and ability to use the colors as tints would be incredible.)

Hugs,
Eirynne

Eirynne Sieyes, Thank you for reply.

Yes, I will give buyers some free updates.
I am planning not only update that fixes bugs but update which adds a function.

And development of ROKURO Pro is not ended. I am planning a free update.

The role of drawing of texture of TATARA is not finish but a rough sketch. herefore, I am not planning large buildup.
The function which an annotation tool has may be added at free update. They are functions, such as customize of a color, drawing of a circle, and selection of the thickness of a line.

Do you also give a free trial period for Rokuro Pro?

Thank you,Eirynne Sieyes!

I should have written it.

The TATARA's trial period is for three days like ROKURO Pro.
You cannot export files during trial period like ROKURO Pro.

Have I replied to your question correctly?
I may not be able to understand your question...

I released ROKURO 1.03a which updated Readme.

I was able to release new Readme with the help of KJ Georgette.

Readme became very intelligible.

Thank you, KJ!

You can download it from
http://kanae.net/secondlife/

Many people donated to ROKURO after I update it.
Thank you for your donation.

Thank you for donating to ROKURO.

Hello. I update ROKURO to 1.04.
-The bug of output algorithm of sculpted prim was fixed.
ROKURO user recommend to update.

Please visit my web page http://kanae.net/secondlife/

Thank you for telling me about this bug, Lady Hathaway.

I am honored to meet you.

This is just the tool I've been searching for.

Someone told me about Rokuro last week, and I have been planning and am eager to build a space station with it.

Thank you for using ROKURO, Holocluck Henly!
I am glad that it is helpful to you.
I apologize for the delay in responding to your message.

And I update TATARA to 3.0.59.

The following points were updated.
-The display language of the internal error was changed into English.
-The description of an output of an OBJ file was changed.
-The Load of OBJ file is corresponded to a new OBJ file. You can also load the OBJ file outputted before. -The preview pane became more exact.
-The fault of "Mirror 80-GG from 00-7G" and "Mirror 08-GG from 00-G7" of a menu was corrected.
-Magnet menu was Added. The control points near the selected control points are made into the same cordinate.

TATARA 3.0.58 users can use their password.

I added temporarily the function to move a preview using SpaceNavigator.
SpaceNavigator is recognized automatically.
If you have SpaceNavigator, please try it.

Please visit my web page http://kanae.net/secondlife/

Hello. I updated ROKURO Pro to 1.40.

I am continuing the development of ROKUROPro.

The following points were updated.
-Cushion was added to the Shape menu.
-The fault of the color of the ordinate in TOKOROTEN mode was corrected.
-The description of an output of an OBJ file was changed.
-The Load of OBJ file is corresponded to a new OBJ file. You can also load the OBJ file outputted before.
-The preview pane became more exact.


Please visit my web page http://kanae.net/secondlife/

Yazuru, would it be possible to allow you to export an UV map texture for texturing the object? It would be a huge help - figuring out how to correctly texture the top of a cylinder you altered the shape of isn't that simple.

I just wanted to say that I know your tool and Wings fdor the bulk of the sculptie work. However, I didnt quite understand the update. Are you saying Rokuro can load obj files now?

Did some back tracking( see post#166 in this thread) Thunderclap it may explain more.

I'd like to know this too(I have alot of .obj files itching to be sculpties,lol). I know Blender has no problems, but when I hit Load .obj file (then selecting one I had made) I noticed nothing happened with the current shape, so I don't know if this update is stating it's an Import/Export function, or something else entirely different. I do know however, that obj files are different and can be quite complex and in groups or individual.

I also noted that with Blender I have no problems loading a Second Life Sculptie into Blender that was made in either Tokoroten or Rokuro, yet if I try to load a similar object from Sculpty Paint I get an error with the .tga file (so the data is somehow getting changed, and i dont have the energy atm to begin to look at those numbers, lol).

One of the reasons Tokoroten and Rokuro are so appealing to me personally is because of the approach ( use of Lathe) which I am familiar with in Photo Impact ( path editing to create 3D object or displacement). I can't remember if the latest Photo Impact supports AV Map creation though, but I'm still able to get a very detailed lathe map made before hand of a shape using Photo Impact.

Thank you for using ROKURO Pro, Icarus Lytton, Thunderclap Morgridge and Hunter Stern.

The contents which output an OBJ file are different by tool.
ROKURO Pro supports file exchange with Wings3D by OBJ file.
But ROKURO Pro can't read the OBJ file which Blender outputted.

However, TATARA supports file exchange with Wings3D and Blender by OBJ file.
Furthermore, TATARA supports UV map Texturing of OBJ File.

Please try TATARA.

TATARA is a cool thing.
Tried it, bought it, use it.!!!


---------------------------------------------------------------------

GRAB SOME VENDORSPACE FOR FREE!!!


/115/16/259202/1.html