Please see in Kandor:
http://slexchange.com/modules.php?name=Marketplace&file=item&ItemID=200729
Take a look at this beauty! Perfect for bars, clubs or anywhere you want to show off High quality Art with with a 1 prim rezzer built in!
operation:
1. Attach the key hud by simply wearing it.
2. Attach the seat by wearing it.
3. Place the vehicle assembly on the ground
4. When the Bike is rezzed right click on it and select ride. If there is no
ride option in the pie menu then you have not selected the seat. Escape
and right click around the seat area until you get the ride option.
5. once you are seated on the bike, click on the hud keys and select start. The
bike will play a engine crank over sound and a puff of exhaust smoke will come
out of the tail pipe. Shortly after that the bike will begin to play an idle engine sound
with idle engine smoke coming out of the exhaust.
6. The Bike is now ready to operate.
Key Hud Menu:
head lights: Will toogle the head lights on and off.
start: starts the bike and initializes the vehicle for operation.
rev: will play an engine reving sound together with exhaust clouds.
stop: turns of the bike and disables the vehicle operation.
push back: toogles the operation of the "s" key on the keyboard between preforming burn outs and
moving the bike backwards.
horn: sounds the bike horn.
Keyboard controls:
Note( all keyboard controls are disabled when the bike is not turned on)
"w" : moves the bike forward, spinning the tires and flowing exhaust based on the current gear.
"a": turns the bike right but only works when pushed together with the "w" or "s" key, the bike must be moving to turn.
"d": turns the bike rleft but only works when pushed together with the "w" or "s" key, the bike must be moving to turn.
"s": when in push back causes the bike to slowly roll backwards, when not in pushback does a burnout of the back tire.
"e": shifts the bike up one gear, when the bike is in motion an audiable gear shit sound can be heard as well.
"c": shifts the bike down one gear, when the bike is in motion an audiable gear shit sound can be heard as well.
When you first mount the bike or turn it on, it may need to be adjusted due to the uneven nature of the ground. If you appear to be
in a strange positon, dont panic. Right click on the seat are until the yellow outline of the invisible vehicle prim is shown. Do not edit the bike
that is worn as a seat attachment to your pelvis. You will know that you have selected the bike because the entire vehicle will light up, escape that
and right click until you get the single yellow outline of the invisible vehicle prim. Now that you have the vehicle prim, drag it into the air a bit
out of the ground completely. Once it is out of the ground esc the edit mode and turn the bike on using the keys. When the bike comes on it becomes
physical and it will fall to the ground and come to rest in the correct positon. You are now ready to go.