Price: L$250 (was L$500 save L$250)
Prim Count: 1 (kit box), 49 (Display Assembled)
Demo SLURL: http://slurl.com/secondlife/Ballyboo/212/45/121
Purchase SLURL: http://slurl.com/secondlife/Ballyboo/212/45/121
Description:
The 7 Segment clock display kit, allows you to
setup a 6 digit, 7 segment clock, in less than 5 minutes.
All you need to do, is place all the items in order (left to right) (hrs_10,hrs_1,min_10,min_1,sec_10,sec_1) all within ~10m of the
controller box (clock_driver), Safest place to put the box is in the middle
.Includes source code
Everything BUT the scripts inside of the premade objects is copy/mod
Those scripts are included in the package.
Please note that the clock is a high-prim device, each "display" (digit) is 8 prims (1 for each segment plus 1 for the backing)
Purchase Instructions:
Go to the bookshelf (which is to the left of the display)
then click "buy" on the box with a picture of a number "21" (top right), check if everything is there, and purchase
Contents of Package:
- OBJECTS:
-- sec_10
-- sec_1
-- min_10
-- min_1
-- hrs_10
-- hrs_1
-- clock_driver
- SCRIPTS:
-- 7Seg_Segment (goes onto each segment)
-- 7Seg_drver (goes onto the backboard)
-- 7Seg_Driver_Time (goes on to any object within 10m of all obj)
Special Instructions:
-- All segments and backboards MUST BE LINKED TOGETHER
also please insure that you add the 7Seg_drver to the backboard FIRST
-- Each segment MUST BE named seg_0 to seg_6
-- Segment numbering is clockwise i.e.
seg_0 = top center
seg_1 = top right
seg_2 = bottom_right
seg_3 = bottom center
seg_4 = bottom_left
seg_5 = top_left
seg_6 = middle_center
-- When a segment goes from high to low (on to off) its alpha is set to 0.1
Support/Help: None at the moment.